Physics of Proximity Josephson Sensor

We study the proximity Josephson sensor (PJS) in both bolometric and calorimetric operation and optimize it for different temperature ranges between 25 mK and a few Kelvin. We investigate how the radiation power is absorbed in the sensor and find that the irradiated sensor is typically in a weak nonequilibrium state. We show in detail how the proximity of the superconductors affects the device response: for example via changes in electron-phonon coupling and out-of-equilibrium noise. In addition, we estimate the applicability of graphene as the absorber material.Comment: 13 pages, 11 figures, submitted to Journal of Applied Physics, v2: Addition of a new section discussing the radiation coupling to the device, several minor change

Absorption of heat into a superconductor-normal metal-superconductor junction from a fluctuating environment

We study a diffusive superconductor-normal metal-superconductor junction in an environment with intrinsic incoherent fluctuations which couple to the junction through an electromagnetic field. When the temperature of the junction differs from that of the environment, this coupling leads to an energy transfer between the two systems, taking the junction out of equilibrium. We describe this effect in the linear response regime and show that the change in the supercurrent induced by this coupling leads to qualitative changes in the current-phase relation and for a certain range of parameters, an increase in the critical current of the junction. Besides normal metals, similar effects can be expected also in other conducting weak links.Comment: 5 pages, 4 figures - supplementary information included: 3 pages, 1 figure; minor modifications to the text and Fig. 2, added Ref. 1

Nonequilibrium phenomena in multiple normal-superconducting tunnel heterostructures

Using the nonequilibrium theory of superconductivity with the tunnel Hamiltonian, we consider a mesoscopic NISINISIN heterostructure, i.e., a structure consisting of five intermittent normal-metal (N) and superconducting (S) regions separated by insulating tunnel barriers (I). Applying the bias voltage between the outer normal electrodes one can drive the central N island very far from equilibrium. Depending on the resistance ratio of outer and inner tunnel junctions, one can realize either effective electron cooling in the central N island or create highly nonequilibrium energy distributions of electrons in both S and N islands. These distributions exhibit multiple peaks at a distance of integer multiples of the superconducting chemical potential. In the latter case the superconducting gap in the S islands is strongly suppressed as compared to its equilibrium value

Developing LCA-based benchmarks for sustainable consumption - for and with users

This article presents the development process of a consumer-oriented, illustrative benchmarking tool enabling consumers to use the results of environmental life cycle assessment (LCA) to make informed decisions. Active and environmentally conscious consumers and environmental communicators were identified as key target groups for this type of information. A brochure presenting the benchmarking tool was developed as an participatory, iterative process involving consumer focus groups, stakeholder workshops and questionnaire-based feedback. In addition to learning what works and what does not, detailed suggestions on improved wording and figures were obtained, as well as a wealth of ideas for future applications

Novel Data Acquisition System for Silicon Tracking Detectors

We have developed a novel data acquisition system for measuring tracking parameters of a silicon detector in a particle beam. The system is based on a commercial Analog-to-Digital VME module and a PC Linux based Data Acquisition System. This DAQ is realized with C++ code using object-oriented techniques. Track parameters for the beam particles were reconstructed using off-line analysis code and automatic detector position alignment algorithm. The new DAQ was used to test novel Czochralski type silicon detectors. The important silicon detector parameters, including signal size distributions and signal to noise distributions, were successfully extracted from the detector under study. The efficiency of the detector was measured to be 95 %, the resolution about 10 micrometers, and the signal to noise ratio about 10.Comment: Talk from the 2003 Computing in High Energy and Nuclear Physics (CHEP03), La Jolla, Ca, USA, March 2003, 6 pages, LaTeX, 5 eps figures. PSN TUGP00

New insights into fetal mammary gland morphogenesis : differential effects of natural and environmental estrogens

An increased breast cancer risk during adulthood has been linked to estrogen exposure during fetal life. However, the impossibility of removing estrogens from the feto-maternal unit has hindered the testing of estrogen's direct effect on mammary gland organogenesis. To overcome this limitation, we developed an ex vivo culture method of the mammary gland where the direct action of estrogens can be tested during embryonic days (E) 14 to 19. Mouse mammary buds dissected at E14 and cultured for 5 days showed that estrogens directly altered fetal mammary gland development. Exposure to 0.1 pM, 10 pM, and 1 nM 17 beta-estradiol (E2) resulted in monotonic inhibition of mammary buds ductal growth. In contrast, Bisphenol-A (BPA) elicited a non-monotonic response. At environmentally relevant doses (1 mu M), BPA significantly increased ductal growth, as previously observed in vivo, while 1 mu M BPA significantly inhibited ductal growth. Ductal branching followed the same pattern. This effect of BPA was blocked by Fulvestrant, a full estrogen antagonist, while the effect of estradiol was not. This method may be used to study the hormonal regulation of mammary gland development, and to test newly synthesized chemicals that are released into the environment without proper assessment of their hormonal action on critical targets like the mammary gland.Peer reviewe

Measurement of the top quark mass using the matrix element technique in dilepton final states

We present a measurement of the top quark mass in pp collisions at a center-of-mass energy of 1.96 TeV at the Fermilab Tevatron collider. The data were collected by the D0 experiment corresponding to an integrated luminosity of 9.7 fb−1. The matrix element technique is applied to tt events in the final state containing leptons (electrons or muons) with high transverse momenta and at least two jets. The calibration of the jet energy scale determined in the lepton + jets final state of tt decays is applied to jet energies. This correction provides a substantial reduction in systematic uncertainties. We obtain a top quark mass of mt = 173.93 ± 1.84 GeV

Measurement of the inclusive \u3ci\u3ett\u3c/i\u3e production cross section in \u3ci\u3epp\u3c/i\u3e collisions at [?] = 1.96 TeV and determination of the top quark pole mass

The inclusive cross section of top quark-antiquark pairs produced in pp collisions at [?] = 1.96 TeV is measured in the lepton + jets and dilepton decay channels. The data sample corresponds to 9.7 fb−1 of integrated luminosity recorded with the D0 detector during Run II of the Fermilab Tevatron Collider. Employing multivariate analysis techniques we measure the cross section in the two decay channels and we perform a combined cross section measurement. For a top quark mass of 172.5 GeV, we measure a combined inclusive top quark-antiquark pair production cross section of σtt = 7.26 ± 0.13(stat)[?] (syst) pb which is consistent with standard model predictions. We also perform a likelihood fit to the measured and predicted top quark mass dependence of the inclusive cross section, which yields a measurement of the pole mass of the top quark. The extracted value is mt = 172.8 ± 1.1(theo)[?] (exp) GeV

Evidence for Simultaneous Production of \u3ci\u3eJ/ψ\u3c/i\u3e and ϒ Mesons

We report evidence for the simultaneous production of J/ψ and ϒ mesons in 8.1 fb−1 of data collected at [?] = 1.96 TeV by the D0 experiment at the Fermilab pp Tevatron Collider. Events with these characteristics are expected to be produced predominantly by gluon-gluon interactions. In this analysis, we extract the effective cross section characterizing the initial parton spatial distribution, σeff = 2.2 ± 0.7(stat) ± 0.9(syst) mb